VRET physiological

From vret
Revision as of 12:13, 24 June 2009 by Wouter (talk | contribs)
Jump to: navigation, search

Attaching the electrodes


The figure below shows how to connect the pads for a heart rate measurement. The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. Note the taped-off sensors "2", it is important to tape them off so that they do not accidentally connect to something. Also avoid sharp kinks in the cables (so NOT as in the picture).

File:Heartmeas.jpg size="50%"

Figure. Pads configured for heart rate measurement


In the figure below you can see also a heart-beat set-up. I guess it is combined with a sweat measurement on the chest. Physiological.jpg Figure from TNO, placed by Willem-Paul.