Difference between revisions of "VRET physiological"
| Line 5: | Line 5: | ||
The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. Note the taped-off sensors "2", it is important to tape them off so that they do not accidentally connect to something. Also avoid sharp kinks in the cables (so NOT as in the picture). | The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. Note the taped-off sensors "2", it is important to tape them off so that they do not accidentally connect to something. Also avoid sharp kinks in the cables (so NOT as in the picture). | ||
| − | [[Image:Heartmeas.jpg | | + | [[Image:Heartmeas.jpg | 50%]] |
Figure. Pads configured for heart rate measurement | Figure. Pads configured for heart rate measurement | ||
Revision as of 12:43, 24 June 2009
Attaching the electrodes
The figure below shows how to connect the pads for a heart rate measurement.
The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. Note the taped-off sensors "2", it is important to tape them off so that they do not accidentally connect to something. Also avoid sharp kinks in the cables (so NOT as in the picture).
Figure. Pads configured for heart rate measurement
In the figure below you can see also a heart-beat set-up. I guess it is combined with a sweat measurement on the chest.
Figure from TNO, placed by Willem-Paul.
