Difference between revisions of "VRET physiological"
| Line 3: | Line 3: | ||
The figure below shows how to connect the pads for a heart rate measurement. | The figure below shows how to connect the pads for a heart rate measurement. | ||
| − | The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. | + | The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. Note the taped-off sensors "2", it is important to tape them off so that they do not accidentally connect to something. Also avoid sharp kinks in the cables (so NOT as in the picture). |
[[Image:Heartmeas.jpg]] | [[Image:Heartmeas.jpg]] | ||
| Line 11: | Line 11: | ||
[[Image:Physiological.jpg]] | [[Image:Physiological.jpg]] | ||
| + | Figure from TNO, placed by Willem-Paul. Here you can see | ||
Revision as of 12:12, 24 June 2009
Attaching the electrodes
The figure below shows how to connect the pads for a heart rate measurement.
The green ground pad is in the one corner, the red and black sensors "1" are diagonally placed wide apart, on the chest. The exact position is not so relevant. Note the taped-off sensors "2", it is important to tape them off so that they do not accidentally connect to something. Also avoid sharp kinks in the cables (so NOT as in the picture).
Figure. Pads configured for heart rate measurement
Figure from TNO, placed by Willem-Paul. Here you can see
